Structural / mechanical failure
Ice Cream Makers (274)
0 months
SaferProducts.gov consumer incident report 20260630-B1ABB-2147314664. Severity: Incident, No Injury. Product: Ninja Creami Deluxe, CN Series 30 (Ninja Creami Deluxe countertop ice cream maker (CN Series 30). A 120V, 60Hz, 800W electric kitchen appliance with a motor base that spins a vertical drive spindle. A removable Creamerizer paddle attaches to the spindle and bores down through a frozen pint to shave and churn it into ice cream.). Incident: During a normal cycle on the Lite Ice Cream setting, the unit completed roughly half the pint, then began making a loud abnormal grinding noise and physically moved/walked side to side across the countertop on its own. I stopped the program immediately. When I removed the outer bowl lid, the Creamerizer paddle had detached from the drive spindle and was loose, and a torn, curved metal fragment (a spiral piece from the blade/paddle assembly) came out stuck to the underside of the lid, with the frozen base frozen around it. The fragment is rigid metal, not frozen dessert. On subsequent attempts the machine ran with noticeably reduced power, the same abnormal noise, and continued side-to-side movement. The paddle-to-spindle coupling had failed, and the spindle appears to have torn metal from the blade assembly during operation. Because metal separated into the food, I discarded the entire pint and stopped using the machine. The unit is approximately 12 days old.
UnverifiedEvidence ★★★★☆View report detailsHide report details
Structural / mechanical failure
Ice Cream Makers (274)
0 months
Months until failure
0 months
Repair cost
Not stated
Repaired
Not stated
Manufacturer warranty
Not stated
Extended warranty
Not stated
Support helpful
Not stated
Would recommend
Not stated
AI extraction confidence
84%
Verification status
Unverified
Evidence quality
★★★★☆ (4/5)