Product image pending

We track images separately from defect reports.

Home & Garden

Panasonic WN1302

2 source-linked failure reports. Most reported: Fire / ignition.

Reliability signal — · Insufficient data · data confidence Very Low

2 confirmed failure reports

Reliability summary

What is likely to go wrong, when it happens, and how expensive it can be — from source-linked failure reports. Counts are reports in our database, not a population failure rate. Methodology →

Reliability signal

—

2 confirmed failure reports · Insufficient data · Data confidence: Very Low

Need at least 5 confirmed failure-signal reports before showing an A–F grade.

Most common issue
Fire / ignition
Typical first failure
—
Median of confirmed reports with timing
Median repair cost
—
Reported costs only · market varies
Highest reported repair
—
Not a quote · costs differ by country

What breaks?

Failure types

Click a type in the reports section below to filter.

  • Fire / ignition2 · 100%

When does it break?

Failure timing

Months after purchase, using reports that included timing.

No timing data yet for this model.

What does it cost?

Reported repair costs

Distribution of owner-reported repair costs— not a quote or guarantee. Labor and parts prices vary by country.

No reported repair costs yet for this model.

Median months to failure

—

Failure reports

2

View →

Median repair cost

—

Still recommend

—

% repaired

—

% mfr warranty

—

% extended warranty

—

% support helpful

—

Use these reports as a risk signal, then check current listings before you buy.

Search this model on Amazon

As an Amazon Associate, After Warranty may earn from qualifying purchases.

Keep researching

What breaks?

What breaks? · reports

Fire / ignition

outlet

Government / agencyIndexed Nov 11, 2026Source-linkedVerify source — NITE Japan accident report

[Translated from Japanese] NITE SAFE-Lite accident A201500630 (2015/12/06). Product: Panasonic WN1302. Incident: the product extension cord connected and during use、the productandthe surrounding area burn damage a fire occurred。 (A201500632same incident as ) (accident location: Ishikawa Prefecture) Investigation note: as a result of the investigation, ○the product, 2 wall outlets, upper left outlet center burn damage had been. ○Multiple discharge marks were observed on the contact surface of the upper double-edged holder and plug blade, and the spacing between the blade holders was about 1mm wider than the lower holder. ○Indoor wiring connection was normal, burn damage, etc. abnormality was not observed. ○The product was inserted into the extension cord power plug, one side of the plug blade was severe burn damage, and the power plug outer resin, the movable part of the plug blade melted, and the contact surface of the wall outlet was burn damage was observed. ●The product, blade holder, extension cord power plug blade, defective orpower plug unit is considered to be the case, detailed usage conditions were unknown because of / due to, including whether it was product-related, , the accident cause could not be identified. Cause class: n/a. Harm reported: 11.fire.

UnverifiedEvidence ★★★★☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

86%

Verification status

Unverified

Evidence quality

★★★★☆ (4/5)

Discussion

Fire / ignition

outlet

Government / agencyIndexed Nov 11, 2026Source-linkedVerify source — NITE Japan accident report

[Translated from Japanese] NITE SAFE-Lite accident A201400754 (2014/12/03). Product: Panasonic WN1302. Incident: the product connected and when, the productandthe surrounding area burn damage a fire occurred. (A201400589same incident as )(accident location: Shizuoka Prefecture) Investigation note: As a result of the investigation, the lighting fixture, telephone and wireless router had been connected and in use at the time of the accident. ○The product had burn damage on one side (grounding side) of the power plug socket, and melting marks were observed on the lock spring holding the electric wire (indoor wiring). ○The product The surface of the wires connected to it is rough and thin, and the wires and lock springs have been welded. ○ Foreign matter was observed between the terminal board and the wires. ●The product caused poor contact between the wires and the terminal board, and the lock spring was energized. Abnormal overheating is presumed, but construction status unknown, so including whether it was product-related, the accident cause could not be identified. Cause class: n/a. Harm reported: 11.fire.

UnverifiedEvidence ★★★★☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

86%

Verification status

Unverified

Evidence quality

★★★★☆ (4/5)

Discussion

Compare nearby models

Similar products

Stay ahead of failures

Notify me about this model

Get an email when a new source-linked failure report is published for the Panasonic WN1302.

We only email when a new published report is added for Panasonic WN1302. No spam, unsubscribe by contacting support.

Contribute signal

Had a failure with this model?

Add your experience and help future shoppers understand what happens after the warranty.

Submit your experience