NHTSA complaint #11572425

Owner complaint summary

An internal defect in the 2014-2020 Jeep Wranglers with the 3.6L Pentastar V6 engine affects its rocker arms, lifters, and related valvetrain components, including the engine control module (ECM) software that controls the precise timing and function of the lifters. Specifically, the rollers of a Pentastar engine’s rocker arms prematurely wear down, become loose, and then drop, which shifts the rocker arm out of alignment. The rocker arms then come into contact with the cam, scraping both components and creating metal debris. This Pentastar V6 engine defect creates an audible ticking sound that stems from metal particles and debris from the failed rocker arms and other components, contaminating the engine oil and circulating throughout the engine. This defect also causes engine misfires, resulting in bucking and surging, decreased engine performance, hesitation, loss of power, premature wear on internal components, and eventually catastrophic engine failure. The check engine light came on in my 2020 Jeep Wrangler with 69,000 miles. After having it read by a dealer, it showed the P219A code, Bank 1 air/fuel imbalance. The dealership told me that if the Jeep was running fine, I did not have to worry about it, as it was likely an O2 sensor. The code was cleared, and the P219A code returned the following day. It was driven approximately 500 miles before noticing that it began idling roughly and had an engine tick, which the dealership confirmed to be a valvetrain issue. The rocker arms, lifters, valves, and camshaft components of the Pentastar V6 engine in my 2020 Jeep Wrangler with 70,000 miles have failed. Three Jeep dealerships in my area and MANY online forums stated that this is a common occurrence with this engine, which has escalated my concern about this problem.