NHTSA complaint #11667318

Owner complaint summary

[XXX] Utility 4D Altitude 4WD 3.6L V6 2020 Jeep Grand Cherokee My 2020 Jeep Grand Cherokee with 3.6L Pentastar V6 engine check engine light came on at 115,000 miles with a P0305 code. The P0305 code for a 3.6L Pentastar V6 engine indicates a misfire in cylinder number five. The week prior I performed a coolant flush and fill with the proper Mopar coolant. A few days later the water pump weep hole started leaking. I replaced the water pump and changed the spark plugs. A few days after this was when the P0305 check engine light came on and I could feel the engine starting to stumble from the misfire. No indication of overheating, coolant temperature was normal between 180 F and 210 F. I kept checking the coolant level and noticed the level dropping after a few days. There was no indication of a coolant leak after replacing the water pump. No coolant in the oil, or oil in the coolant and no white cloud from the exhaust from the coolant leaking into the combustion chamber, typically caused by a blown head gasket, cracked head or block or warped head or block. I set an appointment at the Jeep service department, and they informed me the engine had to be replaced. They said they did a bore scope test and a leak down test to confirmed the coolant was leaking into the cylinder. There are hundreds if not thousands of reports from other owners of Jeep Grand Cherokee and other Jeep, Chrysler, Ram, Dodge owners reporting this same issue. The attached photos show no coolant mixing with the or oil mixing with the coolant, resulting in the coolant only leaking through the combustion chamber to the exhaust confirming the service departments findings. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)