Verified government source

NITE accident A201001073

Product accident information from Japan's National Institute of Technology and Evaluation (NITE) SAFE-Lite database. Narratives are translated to English for display; verify the original Japanese record on SAFE-Lite.

Product

Yamato Denki T5308

Category

Electronics

Failure type

Fire / ignition

Accident narrative

[Translated from Japanese] NITE SAFE-Lite accident A201001073 (2011/03/07). Product: Yamato Denki T5308. Incident: the product laptop, fax and extension cord connected and during use, the product and surrounding burn damage firehad occurred. (accident location: Saitama Prefecture) Investigation note: ○The product multi-tap part burn damage was severe, power cord and plug part burn damage and no. ○ Burn damage to the built-in surge absorbing element (varistor) in the multi-tap section, and a through hole in the element inside the varistor. ○ Burn damage was observed in some parts of the blade holder inside the multi-tap, and melting traces were observed between the blade holders. ○The product is a connected device in standby mode, plug blades, and its original form. ●The product multi-tap part has a built-in surge absorbing element (varistor) overheating, short circuit occurred between the blade holder and , it is presumed this led to ignition, but , burn damage was severe, so , including whether it was product-related, , the accident cause could not be identified. Cause class: n/a. Harm reported: 11.fire.

This is an official accident-information record from NITE SAFE-Lite (事故情報), not a recall notice. Cause determinations may be under investigation or marked as not product-attributable in the original record.

Official year/case number: A201001073. Search this ID on SAFE-Lite to open the original Japanese accident record.