Product
Yamato Denki E5011
Category
Electronics
Failure type
Fire / ignition
Accident narrative
[Translated from Japanese] NITE SAFE-Lite accident A202100085 (2021/03/23). Product: Yamato Denki E5011. Incident: at a store, the product electrical products to connected and during use, the product burn damage and the surrounding area a fire occurred. (A202100044same incident as )(accident location: Saitama Prefecture) Investigation note: as a result of the investigation, ○the product, 2 3-hole multi-taps, 1 1-hole extension cord, refrigerated showcase, refrigerated/heated showcase, charger connected and used. ○The product cord connector body burn damage was observed, most of the blade holder was missing including the caulked part on one side, and part of the blade holder and the crimped part on the other side had been damaged. ○the product connected 3-way multi-tap, plug blades both melted / blewhad been curved, other connected 3-way multi-tap, extension cord, etc. no ignition traces were found. ○The product has been manufactured for 19 years, but the time of purchase and installation was unknown. ●the product blade holder 3-tap multi-tap plug blade poor contact, cord connector body insulating resin carbonization and poor insulation performance, short circuit and fire is considered to be the case , burn damagewas severe , because some parts could not be examined, including whether it was product-related, Cause class: n/a. Harm reported: 11.fire.
Official year/case number: A202100085. Search this ID on SAFE-Lite to open the original Japanese accident record.