Verified government source

SaferProducts incident

Official U.S. Consumer Product Safety Commission consumer incident report from the SaferProducts.gov public database. Use the verification links below to confirm the record on SaferProducts.gov or via the public database export.

Product

Bosch Dishwasher SHE3AR72UC-22

Category

Kitchen Appliance

Report number

20180125-C8463-2147393392

Ownership age

About 1 months to failure (from purchase date when reported)

Failure type

Fire / ignition

Incident narrative

SaferProducts.gov consumer incident report 20180125-C8463-2147393392. Severity: Incident, No Injury. Product: Bosch SHE3AR72UC/22 (White built-in dishwasher.). Incident: I purchased new Bosch dishwasher model SHE3AR72UC/22 from Best Buy this January of 2018. The wiring through my wall for the old one (which I also installed myself in the mid '80s) has only two wires (line and neutral). I decided to ignore the grounding warnings and connected the two wires to the screws on the machine that are plainly marked L and N. I noticed later that when I grabbed my stainless steel sink and touched the washer at the same time I was feeling a slight electric buzz so I decide that I should ground it just to be safe. I did not kill the breaker for this. I was surprised that when I touched the attached wire to ground there were sparks and I could be lightly shocked having skin between the ground and the end of the wire. Something's not right. After some consideration, I decided to switch the L and N wires so that they are connected to what should be the wrong screws as they are labeled. Now, even without the ground wire connected, there is no shock between the sink and machine, and there is also no sparking or juice at the ground when I do connect it. My point is that if a responsible person made all these connections with the power off before turning it on, he or she would not know that there was a constant feed of electricity flowing to ground which is a short but not enough to trip a breaker. I believe that many of the recalled dishwashers with overheating cords causing fires may have the same reversed connections that I found on this new machine which isn't even included in any recall yet. I cannot find anywhere that this is a known cause of these fire

This is a consumer incident report published on SaferProducts.gov. CPSC does not guarantee the accuracy of information submitted by people outside of CPSC. It is not automatically an official recall or manufacturer admission.

Official report number: 20180125-C8463-2147393392. Search that ID on SaferProducts.gov or match it in the CPSC public database export to verify this record.