Product
Honda Pioneer 1000
Category
Baby Gear
Report number
20201006-96E1A-2147369381
Ownership age
About 56 months to failure (from purchase date when reported)
Failure type
Stopped working / malfunction
Incident narrative
SaferProducts.gov consumer incident report 20201006-96E1A-2147369381. Severity: No Incident, No Injury. Product: Honda Pioneer 1000 (2016, Honda Pioneer 1000, Model SXS10M3PG Model Pioneer 1000). Incident: In 2016, I purchased a brand new 2016 Honda Pioneer 1000 utility vehicle/side by side. The bench seat was uncomfortably warm, because the motor is directly below it, and the vehicle did not come with heat shield protection. Later, approximately one to two years later, during one of several safety recalls, the heat shield protection for the seat was added. This greatly reduced the bench seat temperature. However, one day while braking hard, dangerously the front bench seat cushion shifted forward, off of the plastic bench seat frame. After stopping the vehicle I found that the bench seat cushion released from the frame because the glue that held it down failed, around the entire seat. I also found the seat was water logged. I notified Honda USA. Honda USA referred my concern to the local dealer Southern Powersports, Chattanooga, Tn. At this time the vehicle was past it's one year warranty so the dealer only offered to glue the seat back into the frame and not replace it. I chose to glue it myself. I used a [REDACTED] brand adhesive. This held for maybe a year and has since released, making the seat situation dangerous again. In my personal, mechanically inclined, opinion I believe the high heat the bench seat endured, prior to the heat shield kit for the seat, caused the glue/adhesive to release. I can't imagine the glue/adhesive manufacturer engineered their product to be used on a seat inches from a combustion engine without proper heat shielding. In internet searches I found other owners of the same model from the same years that did not come equipped with the later added
Official report number: 20201006-96E1A-2147369381. Search that ID on SaferProducts.gov or match it in the CPSC public database export to verify this record.