Verified government source

SaferProducts incident

Official U.S. Consumer Product Safety Commission consumer incident report from the SaferProducts.gov public database. Use the verification links below to confirm the record on SaferProducts.gov or via the public database export.

Product

Dewalt Model DCS 438 Cut Off Tool DCS438B

Category

Lawn Equipment

Report number

20230225-F299C-2147349326

Ownership age

About 2 months to failure (from purchase date when reported)

Failure type

Electrical shock / short

Incident narrative

SaferProducts.gov consumer incident report 20230225-F299C-2147349326. Severity: Incident, No Injury. Product: Dewalt Model DCS 438 cut off tool DCS438B (Dewalt DCS 438 Cutoff Tool). Incident: Product: Dewalt Model DCS 438 cut off tool. Purchased new approximately January 18, 2023. When I operated the tool I quickly realized that the cutting wheel rotates in a direction opposite to the markings on the tool itself and opposite to what I feel is the intuitive direction of rotation. Specifically, when I press the forward/reverse button to the right (in the direction indicated by the letter "F" on the handle) the cutting wheel rotates clockwise (as seen by an observer looking at the tool from its left side) which is opposite to the direction indicated by the "F" arrow on the guard that shields the user from the cutting wheel. Sparks generated by cutting metal travel upwards toward the operator. Conversely, when I press the button to the left (in the direction indicated by the letter "R" on the handle, the cutting wheel rotates counterclockwise which is opposite to the direction indicated by the "R" arrow on the wheel guard. Sparks generated by cutting metal travel downwards away from the operator. This does not appear to be a mere labeling problem, because the directions of the "F" and "R" arrows on both the handle and on the wheel guard are as shown in the users' manual. I reported the problem to Dewalt, and their customer service representative shipped me a replacement tool which, by all appearances, is also brand-new. However the replacement tool suffers from the same problem as the original tool, i.e. it rotates in the wrong direction - in reverse when the switch is set to forward and forward when the switch is set to reverse. I believe this is a safety issue for

This is a consumer incident report published on SaferProducts.gov. CPSC does not guarantee the accuracy of information submitted by people outside of CPSC. It is not automatically an official recall or manufacturer admission.

Official report number: 20230225-F299C-2147349326. Search that ID on SaferProducts.gov or match it in the CPSC public database export to verify this record.