Verified government source

SaferProducts incident

Official U.S. Consumer Product Safety Commission consumer incident report from the SaferProducts.gov public database. Use the verification links below to confirm the record on SaferProducts.gov or via the public database export.

Product

Cannondale System Six

Category

Kitchen Appliance

Report number

20230408-7DB2C-2147348214

Ownership age

Not stated

Failure type

Structural / mechanical failure

Incident narrative

SaferProducts.gov consumer incident report 20230408-7DB2C-2147348214. Severity: Incident, No Injury. Product: Cannondale System Six (road bicycle, 58cm, System Six, R154505 (2007 model)). Incident: I have an older Cannondale bicycle bought used in in 2013 with 2400 miles on it. I stored the bike until 2019 and then began riding it. In 2022 the arm on the carbon crankset broke at the pedal attachment and nearly caused a crash. I replaced the carbon arm with a metal arm and continued using the bike until the other carbon arm on the right hand side broke at the same place. While searching for a replacement part I discovered a safety recall #07-206 for Cannondale "bicycles with carbon cranksets." I took the broken parts and bicycle to Orange Cycle, the local Cannondale dealer for evaluation. I was told that the Cannondale recall was for a heat treat issue on the aluminum tube in the crank arm assembly and not the integrity of the carbon arms. My concern is that the recall hazard: "The bicycle's crankset could break, posing a fall hazard to the user." actually did happen two times and Cannondale is okay with it. The recall requires me to "stop using the recalled product immediately" which I did because it is broken and unusable, but even if I replace the broken parts with exact replacement parts I am afraid of an accident. Have there been other accidents related to this recall? Is the recall only intended to address the heat treated tube or is the more important carbon arm breakage also included? I am concerned about the real probability of riders falling when fatigue causes the pedal to break from the carbon arm after many repetitive cycles.

This is a consumer incident report published on SaferProducts.gov. CPSC does not guarantee the accuracy of information submitted by people outside of CPSC. It is not automatically an official recall or manufacturer admission.

Official report number: 20230408-7DB2C-2147348214. Search that ID on SaferProducts.gov or match it in the CPSC public database export to verify this record.