Roborock S8

Vacuum Cleaner

Roborock S8

18 source-linked failure reports. Most reported: Dead out of the box - replacement unit also would not power on. Typical failure around 1 yr.

Reliability signal — · Early signal · data confidence Low

18 confirmed failure reports

Reliability summary

What is likely to go wrong, when it happens, and how expensive it can be — from source-linked failure reports. Counts are reports in our database, not a population failure rate. Methodology →

Reliability signal

—

18 confirmed failure reports · Early signal · Data confidence: Low

Early signal (18 confirmed reports) suggests shorter ownership before failure (typical 12 mo), but that is not enough data for a D or F grade.

Most common issue
Dead out of the box - replacement unit also would not power on
Typical first failure
1 yr
Median of confirmed reports with timing
Median repair cost
—
Reported costs only · market varies
Highest reported repair
—
Not a quote · costs differ by country

What breaks?

Failure types

Click a type in the reports section below to filter.

  • Dead out of the box - replacement unit also would not power on1 · 5.6%
  • Roborock s5V stopped mopping two months after warranty expired. Hey guys! I bought my Roborock vacuum on Amazon in August 2025, and of course, just two months1 · 5.6%
  • Failed to calculate the grip spot.. My futuristic robot did a little dance all around this tissue, but ultimately decided it couldn’t find a grip spot. I guess1 · 5.6%
  • My S8 died. Help me choose a replacement.. I narrowed down my options to Qrevo 2 Pro or Qrevo Edge 2. Can't decide which one is better for me. My budget is1 · 5.6%
  • Roborock Dyad Pro Combo stuck at 2% and not charging. Hi everyone, I have a Roborock Dyad Pro Combo and ran into a strange issue yesterday. I was vacuuming1 · 5.6%
  • S8 Pro destroying the map. So since a couple of weeks now, my Roborock started taking longer than usual for its routine. Then I noticed he failed to reach his1 · 5.6%
  • Roborock Budget Vacuum for No Mopping. Trying to help my parents decide on another vacuum since their Roborock S4 Max finally died. I am stuck between1 · 5.6%
  • Dust leaking from bag clogging dock exhaust filter. My Qrevo S5V has been in use for 5 months. I use \[ApexOne\](https://www.amazon.com/dp/B0DNYVKK78) dust1 · 5.6%

When does it break?

Failure timing

Months after purchase, using reports that included timing.

What does it cost?

Reported repair costs

Distribution of owner-reported repair costs— not a quote or guarantee. Labor and parts prices vary by country.

No reported repair costs yet for this model.

Median months to failure

12

Failure reports

18

View →

Median repair cost

—

Still recommend

—

% repaired

50%

% mfr warranty

—

% extended warranty

—

% support helpful

—

Use these reports as a risk signal, then check current listings before you buy.

Search this model on Amazon

As an Amazon Associate, After Warranty may earn from qualifying purchases.

Keep researching

What breaks?

What breaks? · reports

Dead out of the box - replacement unit also would not power on

0 months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock S8 will not turn on straight out of the box (docked an hour, power button held 3/6/10 seconds); this is the second unit - the first was also faulty, Roborock confirmed it and sent a replacement that also does not work.

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

0 months

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

87%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock s5V stopped mopping two months after warranty expired. Hey guys! I bought my Roborock vacuum on Amazon in August 2025, and of course, just two months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock s5V stopped mopping two months after warranty expired. Hey guys! I bought my Roborock vacuum on Amazon in August 2025, and of course, just two months after the warranty expired, it stopped drawing clean water from the tank. I contacted Roborock support, but they told me the vacuum is out of warranty and that I’d have to pay for both shipping and the repair and offered a whooping $20 discount on next one. If it had happened after two years, I’d be more understanding, but having it fail so shortly after the warranty expired is pretty frustrating, especially since I’ve followed all the instructions and used only original Roborock parts and cleaning solution. I also tried the syringe method to prime the system, but I can’t even inject water, as if s

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Failed to calculate the grip spot.. My futuristic robot did a little dance all around this tissue, but ultimately decided it couldn’t find a grip spot. I guess

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Failed to calculate the grip spot.. My futuristic robot did a little dance all around this tissue, but ultimately decided it couldn’t find a grip spot. I guess when you toss tissues on the floor, make sure it’s crumbled and not folded. Apart from that, this is quite the spectacular little vacuum, I wish it would recognize Lego, maybe it could do a collab with Brickognize. The next arm Roborock invents should fold out from the side so it could pick up stuff from underneath furniture, like socks from under the bed.

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

My S8 died. Help me choose a replacement.. I narrowed down my options to Qrevo 2 Pro or Qrevo Edge 2. Can't decide which one is better for me. My budget is

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: My S8 died. Help me choose a replacement.. I narrowed down my options to Qrevo 2 Pro or Qrevo Edge 2. Can't decide which one is better for me. My budget is 750€ max, but could be stretched if really needed (but don't tell my wife :)). S8 was working great for us but it was our first robot and we am ready to upgrade. I want a docking station now. I also want dual anti-tangle brushes and rotating mops. In theory I do like extending arm of Edge 2, better obstacle avoidance tech and higher mop wash temperature, but not sure if it's really worth the extra money (they are currently 150€ apart). Other benefits of Edge 2 doesn't seem important (convince me otherwise!). I live in 80m2 (860 ft2), I have several thick carpets but they amount to

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock Dyad Pro Combo stuck at 2% and not charging. Hi everyone, I have a Roborock Dyad Pro Combo and ran into a strange issue yesterday. I was vacuuming

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock Dyad Pro Combo stuck at 2% and not charging. Hi everyone, I have a Roborock Dyad Pro Combo and ran into a strange issue yesterday. I was vacuuming with around 40% battery left when the vacuum suddenly shut off completely. I put it back into the charging dock, but it now shows only 2% battery and has been stuck there for about 12 hours. A few things I noticed: * The dock recognizes the vacuum and announces that charging has started. * I can still start the self-drying function of the dock. * I already cleaned the charging contacts and checked all cable connections. * As soon as I take the vacuum out of the dock, the display goes completely black and the vacuum won't turn on at all. * Doing a reset did not work. Neither in the Dock, nor

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

S8 Pro destroying the map. So since a couple of weeks now, my Roborock started taking longer than usual for its routine. Then I noticed he failed to reach his

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: S8 Pro destroying the map. So since a couple of weeks now, my Roborock started taking longer than usual for its routine. Then I noticed he failed to reach his dock. When looking at the map now, during each cycle, it reinvents my apartment. First everything just was remapped shifted by half a meter, but now it seems to turn and remap the complete floor just in another direction. That way some rooms get cleaned twice, some are never reached because of imaginary walls, and of course the robot never makes it home, because the dock just is not in the fifth dimension like it thinks it is. I have cleaned the sensors, repeatedly reset the map, but nothing seems to help. Any ideas?

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock Budget Vacuum for No Mopping. Trying to help my parents decide on another vacuum since their Roborock S4 Max finally died. I am stuck between

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock Budget Vacuum for No Mopping. Trying to help my parents decide on another vacuum since their Roborock S4 Max finally died. I am stuck between suggesting the Q7 M5+ or the Q10 X5+. * All hardwood, some area rugs * No mopping ever as it is real hardwood and they don't believe in getting it wet outside something like Bona * No pets. No long hair from either parent. * Self emptying dock is a nice plus (don't even know if there are ones without this now) * They are organized people, they do not care about obstacle avoidance at all. For them, step one for vacuuming is picking everything up. Is there really a reason to pay up for the Q10 X5+ when you don't need the mop to lift up or drop, don't need the mop to vibrate and don't

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Dust leaking from bag clogging dock exhaust filter. My Qrevo S5V has been in use for 5 months. I use \[ApexOne\](https://www.amazon.com/dp/B0DNYVKK78) dust

5 months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Dust leaking from bag clogging dock exhaust filter. My Qrevo S5V has been in use for 5 months. I use \[ApexOne\](https://www.amazon.com/dp/B0DNYVKK78) dust bags. This is what the air exhaust filter in the dock looks like after 5 months. I realized it needed cleaning today, after the dock had problems sucking debris out of the vacuum's internal dustbin. It appears the dust is leaking from the seal where the bag attaches to the dock. Is it normal for this much dust to build up in 5 months? Will genuine Roborock or different aftermarket bags leak less dust?

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

5 months

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock S7 MaxV Ultra docking failure after 3.5 years – anyone else had this issue?. I bought an S7 MaxV Ultra for around AUD $2,000. After about 3.5 years,

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock S7 MaxV Ultra docking failure after 3.5 years – anyone else had this issue?. I bought an S7 MaxV Ultra for around AUD $2,000. After about 3.5 years, the robot can no longer reliably find or return to its dock. As a result, the dock is basically useless. It can't automatically return for charging, wash the mop or empty the dustbin. Even if I manually put the robot on the dock and start mop cleaning through the app, it says it can't locate the dock and the operation fails. I've tried all the usual troubleshooting, cleaning sensors and the dock beacon, checking contacts and repositioning the dock. No luck. I've also found a few other people reporting very similar problems: * [S7 Max Ultra unable to find dock](https://www.reddit.com/r/Roborock/comments/1tlkrgu/s7_max_ult

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Help buying motherboard Roborock S5 Max. Hi everyone, I’m trying to fix my Roborock S5 Max (bought in 2020) which won't charge on the dock — the power button

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Help buying motherboard Roborock S5 Max. Hi everyone, I’m trying to fix my Roborock S5 Max (bought in 2020) which won't charge on the dock — the power button just blinks red endlessly. I’ve already replaced the battery with a new one, but the issue persists, so it seems to be a charging circuit failure on the motherboard. I ordered a replacement motherboard online, but when I opened the robot, I realized it wasn't the right fit. The seller listed it as compatible with the S50/S51/S55, but the internal plastic guide pins and structural layout don't match my S5 Max. Could someone help point me in the right direction or share a link/part number for a motherboard that is 100% compatible with the Roborock S5 Max (Ruby\_S Mainboard)? Tha

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

WiFi not connecting SOLVED!. I SOLVED IT!! after trying almost every instruction on all the Reddit posts about this and all of them failing I finally found the

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: WiFi not connecting SOLVED!. I SOLVED IT!! after trying almost every instruction on all the Reddit posts about this and all of them failing I finally found the solution. Mine previously connected fine and randomly would **refuse to go past the WiFi connection screen after sending the information to my device in the app**. After contacting Roborock, they told me to **try using a second phone with a hotspot as the WiFi** network. THAT WORKED! You can do a firmware update at this point if needed. **The problem was my router even with split bands was not broadcasting a 2.4ghz network at all.** **I bought a $10 WiFi range extender that is 2.4g only on Amazon , plugged it in via Ethernet and set up the second network and it f

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock Saros 10R: Error 31. Hey everyone! I recently bought this broken robot, thinking it would be just a quick sensor swap and i’d have a working robot for

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock Saros 10R: Error 31. Hey everyone! I recently bought this broken robot, thinking it would be just a quick sensor swap and i’d have a working robot for 100€. Well to my shitty luck, it’s not just the rear sensor. After replacing it, I still get the error and after going into BIT mode, it doesn’t just fail the rear sensor, it also fails the front IR sensors and the ToF as well as “Sweep fail”. Thinking that the short circuit of the rear sensor got to the motherboard as well. What can I do in this situation? Is there maybe something i’m missing (like calibrating anything?). Can I have the broken parts of the motherboard soldered (if there are any) or do I nerd to buy a new motherboard? I’d rather avoid that if poss

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

HELP --Roborock QX Revo Ultra 2 vacuum failing. I have had this unit only since August 2026 and today I noticed it was not vacuuming, leaving debris in lines

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: HELP --Roborock QX Revo Ultra 2 vacuum failing. I have had this unit only since August 2026 and today I noticed it was not vacuuming, leaving debris in lines on an almost white floormaking it obvious it wasn't picking up. Ran a vacuum job three times on this floor to be sure I was not wrong. I changed the filter; made sure there was nothing blocking the suction air vent; wiped everything down inside and out. Have never had any hair tangles, etc. Still no improvement. I have no pets and no kids around. Cleaned the unit frequently and only needed 1 debris bag since bought. What else can I do before it goes back to Costco. Disappointed since I will have to remap 3 floors. Thanks for any ideas. I hope this is not what I can expect from a fair

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Roborock Qrevo white died. After it cleaned my living room for the last time yesterday, it docked itself and then never came back to life. RIP. The app showed

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Roborock Qrevo white died. After it cleaned my living room for the last time yesterday, it docked itself and then never came back to life. RIP. The app showed it’s offline. I cannot revive it. Help? Should i just buy a new one?

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

87%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

$1,500 Saros 10R broke 6 months after warranty ended — and Roborock support is a brick wall. Bought a Saros 10R direct from Roborock in May 2025 for about

18 months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: $1,500 Saros 10R broke 6 months after warranty ended — and Roborock support is a brick wall. Bought a Saros 10R direct from Roborock in May 2025 for about $1,500 — their flagship. In November 2026, about 18 months later and just 6 months after the 1-year warranty expired, the app started reporting "Mop cloth mount not installed" even though the mounts are installed. Did all their troubleshooting: reinstalling mounts (no voice prompt), restart + reinstall, magnet check (normal). It looks like an internal sensor fault, not damage — a $1,500 flagship shouldn't die like this. What "support" has looked like since: - 5 email replies, all copy-paste refusals of any free repair/replacement/refund. The only offers: pay for repair out of pocket (they estimated $100–140, but that's just a gues

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

18 months

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Vacuum+mopping = hair left behind (Saros S20). We used to have a Roborock S8 Ultra which did a good job but broke down, so we got a Saros S20 which got amazing

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: Vacuum+mopping = hair left behind (Saros S20). We used to have a Roborock S8 Ultra which did a good job but broke down, so we got a Saros S20 which got amazing reviews. Sadly, it seems when doing vacuum+mopping (at the same time) quite a lot of the dog's hair remains on the floor, with the wet mop going over it causing the hair to stick. When I do a normal vacuum run, it works fine. But it seems this should not be the case, the bag is empty, everything seems normal but vacuum+mopping = bad vacuum performance. Tips?

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

Not stated

Repair cost

Not stated

Repaired

Not stated

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

LiDAR sensor failed three times within one year of May 2024 purchase

LiDAR sensor module

12 months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: S8 bought May 2024 had LiDAR sensor fail for the third time within about a year. Owner previously sent it for repair and also tried a self-replacement sensor; asking whether another fix is worthwhile.

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

12 months

Repair cost

Not stated

Repaired

Yes

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

92%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Navigation/maps failed after 1 year; cannot finish cleans despite sensor cleaning

LiDAR / navigation system

12 months

Forum / discussionIndexed Nov 17, 2026Source-linkedVerify source — Reddit post

Reddit r/Roborock: S8+ worked great then after 1 year of ownership cannot finish a single clean and maps become unusable. Owner cleaned sensors multiple times and deleted maps to remake them without success.

UnverifiedEvidence ★★★☆☆
View report details

Months until failure

12 months

Repair cost

Not stated

Repaired

No

Manufacturer warranty

Not stated

Extended warranty

Not stated

Support helpful

Not stated

Would recommend

Not stated

AI extraction confidence

90%

Verification status

Unverified

Evidence quality

★★★☆☆ (3/5)

Discussion

Compare nearby models

Similar products

Stay ahead of failures

Notify me about this model

Get an email when a new source-linked failure report is published for the Roborock S8.

We only email when a new published report is added for Roborock S8. No spam, unsubscribe by contacting support.

Contribute signal

Had a failure with this model?

Add your experience and help future shoppers understand what happens after the warranty.

Submit your experience